New Games

Tile Match 3D Coloring: A Good Idea Already Being Followed

Tile match 3D coloring clears three of a kind and colors real-world 3D objects, and one follow-up game has already added stickers and room collections.

Left to right: card pile with colored edges under a red 3; orange 1 and gray 4 cards on rainbow number tiles; white bear head covered in numbers above an empty tray and cards
Screenshot: PlayTruffle
In this article4 sections
  1. 01How it plays
  2. 02Matching Numbered Cards to Paint 3D Models
  3. 03Games following its lead
  4. 04How the game rates

This series regularly spotlights some of the better original ideas on the market, following the approach to game innovation covered earlier, so the theory is easier to see in practice. This time it’s a tile match 3D coloring game.

The combination this time: Tile Match + 3D object coloring

How it plays

First, a look at the gameplay:

Gameplay screenshot of this game.
Gameplay screenshot of this game.Screenshot: PlayTruffle

Here’s how it works:

  1. It plays the same as traditional tile matching: get three identical tiles and they clear.
  2. What sets it apart from traditional tile matching is the coloring of real-world 3D objects.

That covers how it plays.

Matching Numbered Cards to Paint 3D Models

The stretch we played runs from partway into Level 5 through the end of Level 6, with a pizza slice in the first and a bear head in the second. The portrait screen stacks three things on a plain light-gray background: the model at the top, a gray tray in the middle and the cards below. The model is a white low-poly object printed with black numbers, like a paint-by-number. On the pizza slice, 1s run along the crust band, 2s cover the main surface, 3s fill three disc shapes and 4s fill two mushroom shapes.

White pizza slice printed with numbers above the tray and cards
Early in Level 5 the pizza slice is still white, printed with the numbers 1 to 4 that mark where each color goes.Screenshot: PlayTruffle

The cards supply the colors. Each has a textured colored face with a large number in the middle and a small number in the top-left corner. In Levels 5 and 6, a number keeps one color through the level, and its areas on the model turn that color. Level 5 uses orange 1s, yellow 2s, red 3s and gray-beige 4s, which end up as the orange crust and underside, the yellow cheese, three red pepperoni discs and two beige mushrooms.

Cards leave the board one at a time and line up in the seven-slot tray from the left. A card just above the tray shows a sparkle trail and light streaks, and some cards in motion show a blank face with no number. At one point in Level 5 the tray holds 2, 2, 1, 4, 4 with two slots free. A circular-arrow icon sits at the top right of the screen during play.

When three cards with the same number are in the tray, they lift out together, and the areas marked with that number fill with the card’s color. Solid colored blocks appear over the model too, with splashes and droplets bursting around it. In one short stretch of Level 6, the bear’s muzzle turns tan, its nose black, and its mouth and one inner ear pink.

Bear head with a tan muzzle, black nose and pink mouth
After the matches, the bear's muzzle is tan, its nose black, and its mouth and one inner ear pink.Screenshot: PlayTruffle

One set of three fills only part of a number’s areas. Some 3-marked patches next to the bear’s tan muzzle are still white after it turns tan, and they are tan themselves once three more tan 3s have risen out of the tray. The limit on screen is the tray’s seven slots, and in Level 6 all seven are briefly full: two black 1s, three tan 3s lifting out and two pink 4s, with another black card arriving.

Some spots on the board hold piles of cards. The colored edges of the cards underneath show below the top card, and taking the top card uncovers the next one. One spot in Level 5 has a gray 4 over red and brown edges, then a red 3 on top with a brown edge below. In that level’s second stage, the middle pile shows orange, red and yellow edges under a red 3.

Card pile with colored edges under a red 3
The middle pile shows orange, red and yellow edges under its top red 3, the colors of the cards beneath it.Screenshot: PlayTruffle

Other cards sit on a rainbow-colored tile with a number, and the number goes down during the stage. In Level 5’s first stage, one tile reads 5, then 4, then 2, then 0 with a yellow 2 still on it, and after that the tile is empty. The third stage has two tiles that read 5 and 5, then 3 and 2, then 0 and 0 with nothing on them. Level 6 has them too, with tiles reading 3 and 4 when the bear first appears and 0 and 0 late in the level.

Orange 1 and gray 4 cards on rainbow number tiles
An orange 1 and a gray 4 sit on rainbow tiles that read 3 and 2, down from 5 and 5 earlier in the stage.Screenshot: PlayTruffle

Levels 5 and 6 each show a bar of three dots at the top, which turns green one dot at a time, one per stage. Each new dot comes with a new set of cards under the tray, while the same model keeps filling in. In Level 5 the second dot is green as the board is down to an empty rainbow tile, and new cards are in place right after. Before the third dot turns green, the slice is mostly colored, with white patches marked 1, 3 and 4 left.

The model is shown from different angles during play, including from behind and at a tilt. From behind, the pizza’s underside is covered in 1s while still white, and later in the level it is fully orange.

A level is won by coloring the whole model. Level 5 ends once the pizza slice has no white numbered patches left, and confetti leads into a darker gray results screen with large gold LEVEL COMPLETE letters, sparkles and the finished model. A coin counter sits at the top right of that screen. Results screens also carry a green Continue button with 10 and a coin icon under the word.

Level 5 results screen with a coin counter and Continue button
The Level 5 results screen shows a coin counter at the top and a Continue button marked 10 with a coin icon.Screenshot: PlayTruffle

Level 6 brings a new model and a new set of card colors. A white bear head takes the pizza’s place, with 1s on the eyes and nose, 2s over most of the head and the ear rims, 3s on the muzzle and 4s on the mouth and inner ears. The first view of the level shows an empty tray above four card spots: a black 1 on a pile with brown edges, a tan 3 on a rainbow tile marked 3, a black 1 on a rainbow tile marked 4, and a brown 2 on a pile with tan and brown edges.

White bear head covered in numbers above an empty tray and cards
Level 6 swaps the pizza for a white bear head covered in numbers, with black, tan and brown cards below.Screenshot: PlayTruffle

The cards here are black 1s, brown 2s, tan 3s and pink 4s, matching the black eyes and nose, brown fur and ear rims, tan muzzle, and pink mouth and inner ears. Late in the level the bear is mostly brown, tan, black and pink, with only the 2-marked top of the head still white. LEVEL COMPLETE follows, along with the finished model and the same Continue button.

A banner ad for another app runs along the bottom during play and on results screens, often marked AD. It changes several times, showing apps such as Hospital Frenzy, Bridge Race, Triple Match City and Donut Stack Sort.

Games following its lead

One game has already followed this idea, shown here:

Tile Match 3D Coloring: A Good Idea Already Being Followed: image 2
Screenshot: PlayTruffle

The main changes:

  1. It adds a sticker-making theme: objects start out plain white, and the player applies materials to them one by one.
  2. A larger collection layer wraps the whole game. There are kitchens, bedrooms and so on, and the player colors the objects in each scene one after another, which feels a bit like home renovation.
  3. The artwork got a boost.

How the game rates

The ratings break down like this:

Category Score Comment
Core gameplay fun 7 Pretty good
Originality 8 A very good creative angle
Art 7 Standard casual-game art

Overall:

  1. Overall score: 7.5.
  2. The two games play basically the same, both taking the route of tile matching plus 3D object coloring. The follower has only refined the game systems around it.
  3. This game was still being tuned at the time of writing, and we’re very optimistic about this kind of play.

That wraps up this combination.

More from this series:

Tap-to-clear puzzling + archery: bows and arrows become level pieces, and hitting targets is the goal

Tile matching + number merging + car repair: a mashup with some real culture to it

A new twist on word puzzles: guess the real-world object, working out the word from a picture and a description

Tile Match + 2048: a very good idea

Snake Vs Block + Archero (where you dodge to move and stop to shoot): ultra-simple pick-up-and-play mixed with midcore play, from Korea’s 111%

How we review games · Report a mistake